Synthesis of voiced sounds using low-dimensional models of the vocal cords and time-varying subglottal pressure

The vocal cords play an important role on voice production. Air coming from the lungs is forced through the narrow space between the two vocal cords that are set in motion in a frequency that is governed by the tension of the attached muscles. The motion of the vocal cords changes the type of flow, that comes from the lungs, to pulses of air, and as the flow passes through the oral and nasal cavities, it is amplified and further modified until it is radiated from the mouth. This complex process can be modeled by a system of integral-differential equations. This paper considers two mechanical models previously used for explaining the dynamics of the vocal cords. It shows that the level of naturalness of the sound generated by these models is rather poor, and it proposes temporal variations of the parameters of the models to increase such level. Examples of synthetic vowels and diphthongs are given to assess the models. In general, the results show that, although the system of voice production is complex, we can achieve satisfactory results with relatively simple low-dimensional models, by suitable temporal variations of the aerodynamic parameters.     

Preparation and Characterization of trans‐1,4‐Polybutadiene Nanocomposites Containing in situ Generated Silica

Abstract

trans‐1,4‐Polybutadiene (tPBD) networks crosslinked free radically with dicumyl peroxide (DCP) were reinforced by in situ silica formed in a two‐step sol–gel technique. Changing the degree of crosslinking by changing the amount of DCP, or changing the amounts of the sol–gel components [tetraethoxysilane (TEOS) and dibutyltin diacetate (DBTDA)], changed the silica generated with regard to the amount precipitated, particle size, and degree of dispersion. Stress–strain measurements in continuous extension indicated good reinforcement, even at relatively low amounts of silica. Differential scanning calorimetry (DSC) indicated decreases in heat of crystallization with increases in the amounts of silica, but thermogravimetric analysis showed initial decomposition temperatures (IDT) remained relatively constant. Suggestions are made regarding interpretation of these properties in terms of the composite morphologies.     

Tailoring the morphology and properties of waterborne polyurethanes by the procedure of cellulose nanocrystal incorporation

Polyurethane waterborne synthesis was performed using a two-step method, commonly referred to as a prepolymer method. Nanocomposites based on waterborne polyurethane and cellulose nanocrystals were prepared by the prepolymer method by altering the mode and step in which the nanofillers were incorporated during the polyurethane formation. The morphology, structural, thermal, and mechanical properties of the resulting nanocomposite films were evaluated by Fourier transform infrared spectroscopy (FTIR), small angle X-ray scattering (SAXS), scanning electron microscopy (SEM), and tensile tests. FTIR results indicated that the degree of interaction between the nanofillers and the WPU through hydrogen bonds could be controlled by the method of cellulose nanocrystal incorporation. Data obtained from SAXS experiments showed that the cellulose nanocrystals as well as the step of the reaction in which they are added influenced the morphology of the polyurethane. The reinforcing effect of CNCs on the nanocomposites depends on their morphology.     

Effects of gas sparging and mechanical mixing on sonochemical oxidation activity

The effects of air sparging (0–16 L min⁻¹) and mechanical mixing (0–400 rpm) on enhancing the sonochemical degradation of rhodamine B (RhB) was investigated using a 28 kHz sonoreactor. The degradation of RhB followed pseudo first-order kinetics, where sparging or mixing induced a large sonochemical enhancement. The kinetic constant varied in three stages (gradually increased → increased exponentially → decreased slightly) as the rate of sparging or mixing increased, where the stages were similar for both processes. The highest sonochemical activity was obtained with sparging at 8 L min⁻¹ or mixing at 200 rpm, where the standing wave field was significantly deformed by sparging and mixing, respectively. The cavitational oxidation activity was concentrated at the bottom of the sonicator when higher sparging or mixing rates were employed. Therefore, the large enhancement in the sonochemical oxidation was attributed mainly to the direct disturbance of the ultrasound transmission and the resulting change in the cavitation-active zone in this study. The effect of the position of air sparging and mixing was investigated. The indirect inhibition of the ultrasound transmission resulted in less enhancement of the sonochemical activity. Moreover, the effect of various sparging gases including air, N₂, O₂, Ar, CO₂, and an Ar/O₂ (8:2) mixture was compared, where all gases except CO₂ induced an enhancement in the sonochemical activity, irrespective of the concentration of dissolved oxygen. The highest activity was obtained with the Ar/O₂ (8:2) mixture. Therefore, it was revealed that the sonochemical oxidation activity could be further enhanced by applying gas sparging using the optimal gas.     

GO/PVA nanocomposites with significantly enhanced mechanical properties through metalion coordination

In this study, a simple and efficient way is demonstrated to create strong interfacial interaction between graphene oxide(GO) filler and poly(vinyl alcohol)(PVA) matrix through metal ion coordination. The coordination bonding provides efficient load transfer during the tensile process, and enhances the mechanical properties of the nanocomposites significantly. After being coordinated with Cu(Ⅱ) ions, GO/PVA composites show much higher Young's moduli and yield stresses than pure PVA and noncoordinated GO/PVA. UV–vis and FTIR spectra are performed to confirm the successful coordination between GO and PVA. Ethylene diamine tetraacetic acid disodium salt(EDTA-2 Na) is used to confirm the important role of coordination in enhancing the composites. This research provides a new approach to manufacture polymer-matrix nanocomposites with significantly improved mechanical performances.     

A unified theory for brittle and ductile shear mode fracture

A unified theory captures both brittle and ductile fracture. The fracture toughness is proportional to the applied stress squared and the length of the crack. For purely brittle solids, this criterion is equivalent to Griffith's theory. In other cases, it provides a theoretical basis for the Irwin-Orowan formula. For purely ductile solids, the theory makes direct contact with the Bilby-Cottrell-Swinden model. The toughness is highest in ductile materials because the shielding dislocations in the plastic zone provide additional resistance to crack growth. This resistance is the force opposing dislocation motion, and the Peach-Koehler force overcomes it. A dislocation-free zone separates the plastic zone from and the tip of the crack. The dislocation-free zone is finite because molecular forces responsible for the cohesion of the surfaces near the crack tip are not negligible. At the point of crack growth, the length of the dislocation-free zone is constant and the shielding dislocations advance in concert. As in Griffith's theory, the crack is in unstable equilibrium. The theory shows that a dimensionless variable controls the elastoplastic behaviour. A relationship for the size of the dislocation-free zone is derived in terms of the macroscopic and microscopic parameters that govern the fracture.     

体外预应力梁摩擦效应的非线性分析

构造了简单的体外预应力梁的摩擦单元,摩擦单元位于转向块和体外筋之间的角平分线上,能模拟转向块和体外筋之间的有摩擦或无摩擦滑移。考虑混凝土、钢筋和体外筋应力-应变的非线性关系,采用梁截面弯矩-轴力-曲率的三折线模型,探讨了体外预应力梁的性能。对简支梁和连续梁的不同因素进行计算,包括不同摩擦系数、不同体外筋和钢筋面积、不同偏心距以及对称和非对称荷载形式。计算结果表明,对于简支梁和对称荷载下的连续梁,承载力的摩擦效应可以忽略,最大预应力增量和挠度的摩擦效应不宜忽略,最小预应力增量的摩擦效应明显;对于非对称荷载下的连续梁,承载力、最大和最小预应力增量以及挠度的摩擦效应不可忽略。     

LiB6Si: An indirect band gap semiconductor

Using first-principle calculations, mechanical properties, electronic structure, and Raman spectra of LiB₆Si structure were investigated. The band structures calculated by GGA-PBE and HSE06 methods reveal that LiB₆Si is an indirect band gap semiconductor. The band gap estimated by HSE06 method is about 2.24 eV, which is in good agreement with that of experimental value 2.27 eV. The calculated tensile stress-strain curves of LiB₆Si reveal that [010] direction is the cleavage direction under tensile strains. The calculated Raman spectra of LiB₆Si are also in good agreement with that of measured. The position of the band gap may provide a basis for further photocatalysis research on LiB₆Si.     

Structural characterization and hydrogen sorption properties of the Mg50Ni45Cr5 alloy

The Mg₅₀Ni₄₅Cr₅ alloy for hydrogen storage is prepared by mechanical alloying. First, using the X-ray diffraction (XRD) and the scanning electron microscopy (SEM) we examine the morphology and the structure of the substrate. The obtained results highlight the effectiveness of this alloy in loading hydrogen as it is a nanocrystalline and a ductile one. Second, we attempt to justify these expectations using the statistical physic, precisely the model monolayer with two levels of energy, in modeling a hydrogen absorption and desorption isotherms on Mg₅₀Ni₄₅Cr₅ alloy at four temperatures T?=?275?K, T?=?300?K, T?=?325?K and T?=?350?K. The model has six physicochemical parameters deduced from the fitting of the isotherms, they are divided by two categories of steric and energetic parameters. Thanks to these parameters we compare the absorption and desorption processes, in order to highlight the hysteresis phenomenon encountered during the hydrogen sorption.     

Mixed mode fracture of a piezoelectric–piezomagnetic bi-layer structure with two un-coaxial cracks parallel to the interface and each in a layer

The purpose of the present work is to study the mixed mode fracture of a piezoelectric–piezomagnetic composite with two un-coaxial cracks parallel to the interface and each in a layer. Methods of generalized dislocation simulation, Green’s function, Cauchy singular integral equation and Lobatto–Chebyshev collocation are combined together to get the numerical results of mechanical strain energy release rate (MSERR). Three kinds of effects are revealed by parametric studies, i.e., the free-surface effect, the shielding effect and the interference effect, and they are used to interpret the characteristics of COD and MSERR curves. In addition, the effects of shear loading, magnetic loading and electric loading on MSERR are also disclosed, respectively, by varying the corresponding loading factor.